This Stainless EPDM lock Washers vs Stainless steel Nylock review will help you choose the right washer. The stainless Nylock can survive in all kinds of weather.
I tried to renovate an antique chair that I had purchased from a quick sale because it matched my decor. When I purchased it, the model was very creaky and seemed to shake every time someone sat on it. I didn’t want to have a piece of furniture taking up space in my living room without serving its purpose so I considered fixing it up myself. Since I do not have the skill or knowledge to handle antique repairs, I looked online to find out how to do it.
What are the differences between Stainless EPDM lock Washers vs Stainless steel Nylock (lock nut)? – How do they compare?
| Comparison | Stainless EPDM lock Washers | Stainless steel Nylock |
| Size | ¼ inch (other options available) | ¼ inch (other options available) |
| Weight | 6.4 ounces | 12.8 ounces |
| Material | Stainless steel | Stainless steel |
| Usage | Strong metals | Strong metals |
| Check the price | Check the price |
Stainless EPDM lock Washers vs Stainless steel Nylock (lock nut) – how do they compare
Material
The EPDM lock washer is made of high quality material that is weather resistant. The EPDM and steel combination will not damage under the sun’s radiation or under any other outdoor temperatures. The super aging quality of the washers ensures it stands the test of time.
The nylock is made from high grade stainless steel. it offers a high level of corrosion and chemical resistance. To add on that, the strength of the nylock cannot be compared to that of any other zinc coated washers.
Design
These EPDM lock washers have an inside diameter is as ¼ inches while the outside diameter is 5/8 inches. The EPDM material is bonded with steel on either side. This makes it friction resistant and more durable.
The nylock nut is an elastic stop nut that comes in several sizes. At one end of the fastener is a nylon collar insert that is meant to lock the rivet into a nice, tight position while in contact with the bolt.
Installation and effectiveness
The nylon part of the nylock is created in a smaller diameter than the entire nut. This enables it to lock the fastener in place; the nylon is griped in place firmly while the bolt is being fastened. It prevents any kind of vibrations and consequently movements by the bolt. You are supposed to place the insert at the end of the nut.
The Stainless EPDM lock Washers is supposed to be used with an externally threaded surface like a screw that is the size of the inner diameter of the washer. Lubrication does not loosen it because it works with both strength and friction to keep things tight and in place.
Stainless EPDM lock Washers
These stainless lock washers are made from quality EPDM material that is weather resistant. It can resist any kind of extreme temperatures including radiation from the sun and other outdoor temperatures. These rubber lock washers come in 100 pieces and the inside diameter is ¼ inches while the outside diameter is 5/8 inches.
The rubber material is bonded with steel to make it even stronger and more durable. You can use these washers with nuts, bolts and screws and they will work just fine. They are the perfect sealing solution. The combination of materials makes them age resistant. They will stand the test of time as well as keep any leak seal proof. The surface of the wash is used to seal face of the next washer. These washers are perfect for use in environments that are constantly wet or humid.
Pros
- Made of high quality weather resistant material
- It is leak proof
- Prevents vibrations
- Works well with spacers
Cons
- Expensive
Stainless steel Nylock (lock nut)
This nylock is made of high quality stainless steel. The product has one of the highest corrosion resistant materials. The material is categorised as 100%18-8 stainless steel. This property makes the nylock last longer than most other lock nuts in the market. you can completely depend on this not when it comes to any form of use. It is perfect for both indoor and outdoor bolt tightening.
Due to its corrosion resistance, you can install this nut in environments with all forms of weather. They are perfect when installing in wet environments and woods. This lock washer will support all types of projects. Better yet, the humidity will not penetrate through to the bolt thus keeping the two safe from rust or corrosion.
Pros
- It is made of corrosion resistant material
- Long lasting ‘
- It is great for both indoor and outdoor use
Cons
- They bind irreversibly
The bottom line
The Stainless EPDM lock Washers takes the win. They are extreme leak proof seals and will dampen vibrations. When you compress them against any form of material they will prevent air, or any liquids from transferring in and out through that space. It also acts as a cushion and prevents vibration transference which may otherwise damage some properties.
FAQS
What is the main advantage or difference of the Nord lock when it comes to the tightening technique?
When used correctly, the Nord lock will prevent your bolds and screws from growing lose. Any form or lubrication will not affect the locking done by the Nord lock.
Can a stainless EPDM lock Washers be used in metal roofing or to replace other washers?
The stainless EPDM washer is just as good as the basic washer, even when you are using them on roofing. You have to watch out with for the diameter of the washer and that of the bolt to make sure they fit perfectly
Can you reuse the washer? If so, how many times can you do that?
The washers are completely reusable depending on some factors such as the environment and external factors. If the serrations of the nylock are still intact, you can re-use them as much as you can.
Can you lubricate with the Nylock still in place?
Yes you can. The Nylock uses both tension and friction to prevent the screws from loosening up. The lock washer is not affected in any way by the lubricant.
Can the Nylock or EPDM lock washers be used with slotted holes?
You can use them with smaller screws as long as the contact surface of the washer will be able to carry the load. You can use a fastener with the washers for better distribution.
